Tribological Properties and Film Formation Behavior of Thermoreversible Gel Lubricants

The tribological properties of a new and unique thermoreversible gel lubricant (TR gel lube) were investigated. TR gel lube, which includes 10–40% of amide-type gelling agent in base fluid, is able to repeatedly alter or convert phase from gel state to liquid state at the melting point of the gelling agent. High-pressure rheological tests were performed in order to characterize the behavior of base oil and TR gel lube as a function of pressure and temperature. The effect of TR gel lube on ball bearing fatigue life was carried out by systematic tests using thrust ball bearings. The results of L ₁₀ life tests of TR gel lube showed a longer life than the conventional greases. This result was investigated from the oil film formation. It was found that the gelling agent played a key role in the lubricating properties. Some mechanisms such as adsorbed film formation and solid-like formation are proposed.     

Protective effects of galacturonic acid-rich vinegar brewed from Japanese pear in a dextran sodium sulfate-induced acute colitis model

The effects of pear vinegar (PV), which was specially brewed for enhanced galacturonic acid content, on the DSS-induced ulcerative colitis (UC) mouse model were evaluated. PV improved clinical symptoms, colon inflammation, and histological tissue injury in the DSS-induced acute UC mouse model. Moreover, PV suppressed inflammation due to acute UC by suppressing the myeloperoxidase (MPO)-mediated activation of inflammatory cells such as leukocytes and decreasing the serum concentration of IL-6. Our results demonstrated the protective action of PV in the DSS-induced acute UC mouse model. On the other hand, commercial apple vinegar did not show a protective effect in the DSS-induced acute UC mouse model. Our findings indicate that PV may act as a new functional food for inflammatory bowel disease patients.     

Enzymatic digestion of corncobs pretreated with low strength of sulfuric acid for bioethanol production

In this study, the effect and the optimum pretreatment condition of corncobs using low strength of H₂SO₄ were investigated, in which H₂SO₄ was used to improve the enzymatic digestibility of corncobs for saccharification without degradation of sugars released. The optimum pretreatment condition was found to be the addition of 0.5% (vol./vol.) H₂SO₄ and autoclaving at 122 °C for 20 min. Under this condition, the structural integrity of corncob was altered to make cellulose microfibrils more accessible for cellulase enzymes, and the enzymatic digestion of corncobs could be significantly enhanced. A high yield of sugar, 80% (wt./wt.), could be obtained at a low enzyme dosage of 0.024 g enzymes/g cobs, when pretreated. As a result, the ethanol production was obviously improved by the pretreatment, i.e., the ethanol yield of 77% (wt./wt.) was obtained within 36 h in the SSF fermentation using Saccharomyces cerevisiae NBRC2114.     

Advanced energy saving in the reaction section of the hydro-desulfurization process with self-heat recuperation technology

The reaction section of the naphtha hydro-desulfurization (HDS) process is a heating and cooling thermal process consisting of a feed/effluent heat exchanger and a fired heater. Energy savings are fundamentally made as a result of the maximized heat recovery in the heat exchanger and the reduced heat duty of the fired heater. To achieve further energy saving in the process, “self-heat recuperation technology” (SHRT) was adopted. In this technology, a compressor was introduced. The suction side of the compressor needed a lower pressure and the feed stream evaporated much easily. The discharged side of the compressor satisfied the operating conditions of both pressure and temperature at the inlet of the reactor. And the reactor effluent stream was able to be used completely to preheat and vaporize the feed stream. All the heat in the process stream was re-circulated without using a fired heater. SHRT was applied to the naphtha HDS process of 18,000 barrel per stream day (BPSD) in the refinery and the mass and energy balance of the process was calculated using commercially available simulation software, Invensys PROII version 8.1. This process-simulation case study confirmed that despite there being no more energy saving potential in the conventional process that makes use of a fired heater, the advanced process with SHRT can reduce the energy consumption significantly by using the recuperated heat of the feed stream.     

Shear-induced pre-crystallization structures of long chain branched polypropylene under steady shear flow near the melting temperature

Shear-induced crystallization of a long chain hyper-branched polypropylene (LCB-PP, denoted PP-3) was carried out at a relatively high temperature of 170 °C, close to its melting temperature of 158 °C. Small-angle X-ray scattering (SAXS) showed that the intensity ratio of the normal to the perpendicular to the shear (V/H) was always larger than 1 for PP-3, indicating that shish-like structures were predominately formed and further growth to kebab was suppressed in PP-3. The crystallization behavior of PP-3 can be explained by the nature of PP-3 that there were a large amount of crystallization nuclei due to their branching points, and the point-like precursors formed from these nuclei were arrayed linearly along the shear direction and transformed into thread-like precursors or premature shishs; however, owing to the large amount of branching, further progress in crystallization was suppressed.     

Selection of injection conditions for aluminum particles as a raw material by numerical analysis in the synthesis of ultrafine particles with transferred type arc plasma

We investigated by numerical analysis the dependence of vaporization behavior of aluminum particles injected into transferred type arc plasma on injection conditions in synthesis of aluminum nitride ultra fine particles. On the basis of calculation results, we chose one proper injection condition where aluminum particles vaporized more. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(2): 46–52, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20852     

Basics of analytical methods used for the investigation of interaction mechanism between cements and superplasticizers

In order to better understand the interactions between cements and superplasticizers (high-range water reducers), various analytical methods have traditionally been applied, but some of these methods can introduce significant errors. In this paper the fundamental interaction mechanisms are reviewed and appropriate methods and sample preparation conditions are explained in detail. For superplasticizer adsorption measurements, analysis by size exclusion chromatography is useful in order to avoid the effect of other organic compounds released from cement by the action of the superplasticizer. For BET specific surface area measurements it is important to avoid pre-drying at over 60 °C, as otherwise ettringite can decompose and strongly increase the surface area. In order to evaluate pore solution chemistry correctly the aqueous phase must be extracted without dilution. In addition, the fluidity performance of many cements in superplasticized concretes can be changed simply by passage through a storage silo, for reasons which are not yet understood.     

Micro-flowers of poly(p-phenylene pyromelliteimide) crystals

Morphology control of poly(p-phenylene pyromelliteimide) (PPPI) crystals was examined using reaction-induced crystallization of oligomers during solution polymerization of self-polymerizable N-(4′-aminophenyl)-3-carboxyl-4-alkoxycarbonylphthalimide. Micro-flowers of the PPPI needle-like crystals were formed in which the needle-like crystals grew radially from the center part as petals. The molecules aligned regularly along the long axis of the needle-like crystal. The structure of alkoxy group in the monomer and the monomer concentration influenced the size of the needle-like crystals, and their average length and width were changeable from 640 nm to 1.69 μm and from 110 nm to 210 nm, respectively. The average thickness was 20 nm. The obtained micro-flowers possessed high crystallinity and exhibited excellent thermal stability.